Remote Access To Your Modem Configuration Settings54 Tr-069; Changing User Names And Passwords - Zoom X6 User Manual

The TR-069 option of the X6 Configuration Manager opens a page
where you can allow an Access Control Server (ACS) to control
and configure your X6.
This feature must be supported by your service provider and
should be used only if the provider instructs you to enable it.
1
Click Management from the left-side menu of the Zoom
Configuration Manager.
2
Then click TR-069 Client.
3
After you make changes on the TR-069 client – config page,
click Save.
Changing User Names and
Use the Passwords page to manage the user names and passwords
that can access the Zoom Configuration Manager. To open this
page, click Management
When you installed the X6 and tried to open the Zoom
Configuration Manager, you were prompted for a User Name
and Password in order to gain access. (The default user name and
password were supplied to you in the section Establishing
Communication.)
If you want, you can change the default password. Changing the
password is not required, but as a good security measure, we
recommend it.
To change the default password
Access to your DSL modem is controlled through three user
accounts: admin, support, and user.
Passwords
Access Control Passwords.
TR-069
55