Connecting A Windows Vista Computer With Built-In Wireless Capabilities - Zoom X6 User Manual

where you choose a location. Windows Vista automatically
applies the correct network security settings.
If the User Account Control dialog box appears, click
Continue.
• Click Close to complete the connection procedure. Select
this option if you are connecting to this network only one
time.
To disconnect from the current network:
1
Right-click the wireless network icon in the notification area of
the Windows taskbar.
2
Right-click Zoom and select Disconnect.
Connecting a Windows Vista
Computer with Built-in Wireless
Capabilities
1
From the Start menu select Connect to.
2
In the Connect to a network dialog box, highlight Zoom and
click Connect.
• If your desired network is secured, in the next dialog box
enter the security key or password and click Connect.
• If your desired network is unsecured, in the message box
select Connect Anyway.
Note: We strongly recommend that you set up a secured
network. For information on wireless security, see Setting
Wireless Security on page 27.
If you have difficulty connecting, make sure you have entered
the correct password. Then perform a power cycle on your
computer and the X6 as described in
Troubleshooting Tips
Chapter 3: Setting up Your Wireless Network
Appendix D:
on page 72.
X6 User Manual