Table of Contents
Advertisement
Connecting a Windows Vista
Computer with Built-in Wireless
Capabilities
1 From the Start menu select Connect to.
2 In the Connect to a network dialog, highlight the desired
network and click Connect.
• If your desired network is secured, in the next dialog box
enter the security key or password and click Connect.
• If your desired network is unsecured, in the message box
select Connect Anyway.
Note: We strongly recommend that you set up a secured
network. For information on wireless security, see
Wireless Security
If you have difficulty connecting, make sure you have entered
the correct password. Then perform a power cycle on your
computer and the X6v as described in the
Tips
on page 153.
3 In the Successfully connected to [desired network] dialog,
you have three options. You can:
•
Select Save the network and Start this connection
automatically if you always want to connect to the same
network. Then click Close. The next time you start your
computer you will automatically connect to the selected
network.
• Select Save the network and clear the Start this
connection automatically check box if you don't want to
Chapter 2: Setting Up Your Wireless Network
on page 29.
Troubleshooting
Setting
23
Advertisement
Table of Contents
