Connecting The Modem To Your Computer - Zoom 2985C User Manual

Windows Me/2000/XP users: Click Finish and restart your
computer when prompted to do so.

Connecting the Modem to Your Computer

Make a note of the serial number of your faxmodem, which
1
is located on the bottom of the case, just under the bar-
code.
Connect the USB cable by plugging the cable's square end
2
into the USB jack on the back of the faxmodem. Plug the
other rectangular end into the USB connector on your com-
puter.
Windows 2000 users: You may see a dialog box stating
3
Digital Signature Not Found. You can safely ignore this
message and click Yes.
Windows XP users: You may see a standard disclaimer
dialog box regarding Windows logo testing. You can safely
disregard this message and click Continue Anyway.
Connect the phone cord. Plug one end of the cord into the
4
phone jack on the back of the modem. Plug the other end
into the wall jack just as you would a telephone.
Note: Use the supplied telecommunication cable or an
equivalent of minimum AWG 26 line cord.
Continue below.
5
4 USB Faxmodem Installation Guide