Fog Lamp Removal And Installation; Front Park/Turn Signal Lamp Removal And Installation; Side Marker Lamp Removal And Installation - Jeep Cherokee 2000 Service Manual

XJ
REMOVAL AND INSTALLATION (Continued)
FOG LAMP
REMOVAL
(1) Disconnect the fog lamp wire harness connec-
tor.
(2) Remove the screws attaching the fog lamp to
the support (Fig. 3).
(3) Separate the fog lamp from the vehicle.
Fig. 3 Fog Lamp
1 – FOG LAMP
2 – BUMPER
INSTALLATION
(1) Position the fog lamp in the support bracket
and install the screws.
(2) Connect the fog lamp wire harness connector.
FRONT PARK/TURN SIGNAL LAMP
REMOVAL
(1) Remove the headlamp bezel.
(2) Remove the screws attaching the park/turn sig-
nal lamp housing to the grille opening panel (Fig. 4).
(3) Remove the bulb sockets and separate from the
vehicle.
INSTALLATION
(1) Install bulbs and sockets in the lamp housing.
(2) Position the park/turn signal lamp housing on
the grille opening panel and install the screws.
(3) Install the headlamp bezel.
SIDE MARKER LAMP
REMOVAL
(1) Remove screws attaching side marker lamp
lens to grille opening panel (Fig. 5).
Fig. 4 Park/Turn Signal Lamp
1 – NUT
2 – BEZEL
3 – PARK/TURN LAMP
4 – BUMPER
(2) Remove bulb and socket from back side of
lamp.
Fig. 5 Side Marker Lamp
1 – GRILLE OPENING PANEL
2 – FENDER
3 – SIDE MARKER LAMP
INSTALLATION
(1) Install bulb and socket in back of side marker
lamp.
(2) Install side marker lamp in grille opening
panel.
LAMPS 8L - 15