Printing Detail Control F4 Ptsel - Adam Equipment UG119 User Manual

EN
5) Press the [Print] key to change the setting for the printing control and
press [Zero] to save.
6) The current setting for data transmission speed "Bps" will now be
displayed.
600, 1200, 2400, 4800, 9600 are available. Default is 9600.
Press the [Print] key to change the setting and press [Zero] to save.
Test will be displayed, press the [Print] key to send a test print
command.
7) Press [Zero] to save, [cm/ft] to exit, then [kg/lb] to select the next
parameter.
6.4 PRINTING DETAIL CONTROL
The MUW can be programmed to provide a customised print out to give you
the readings you require. Doctor, patient, DiSP1, DiSP2, DiSP3 details can all be
enabled or disabled to suit the information you need to see.
1) Switch on the scale then press the [kg/lb] key during the self-checking
test of the display.
2) The display will show the first function
3) Press the [kg/lb] key to select
show the current settings.
SETTING DESCRIPTION
Doctors Id number
dr.Id
Patient Id number
PAt.Id
Display 1 shows the weight of the patient
DiSP 1
Display 2 shows the height of the patient
DiSP 2
Display 3 shows the BMI of the patient
DiSP 3
Print out following calibration
CAL
Date and time
d-t
© Adam Equipment Company 2012
F F F F 4 4 4 4 P P P P S S S S E E E E L L L L
T T T T
F1 F1 F1 F1 EL. EL. EL. EL.
F4 F4 F4 F4 P P P P S S S S E E E E L L L L
and then [Zero] to enter and
T T T T
11
SELECTIONS
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
700660229revA-Jul12