Printing And Outputting The Results; Clearing A Previous Result - Adam Equipment UG119 User Manual

EN
5.6

PRINTING AND OUTPUTTING THE RESULTS

If a printer or other data collection device is being used the results will be sent
automatically or manually depending on the printing control set up. The data
transmission speed must be set correctly to allow the results to be received.
The Doctor and patients identity number can be programmed into the Indicator
to give you a traceable record which also records date and time.
To enter the Doctors Id press and hold the [Print] key for 2 seconds. The
display will show as below, use the [Print] and [Clear] keys to move the flashing
digit and the [kg/lb] and [cm/ft] keys to enter the Id number you require and
press [Zero] to save.
The display will now show the Patients Id screen, use the keys as above to set
the Id number and press [Zero] to save and exit back to normal weighing.
See section 6.3 and 6.4 for printing controls and data transmission speed
options
5.7

CLEARING A PREVIOUS RESULT

Once the results have been calculated and displayed they will remain displayed
until the [Clear] key is pressed. When the patient has stepped off the platform
and the results have been recorded or printed, the [Clear] key can then be
pressed which will return the display to zero ready for the next patient to be
weighed.
© Adam Equipment Company 2012 8 700660229revA-Jul12