Setting Auto Off F2 Off; Setting The Printing Controls F3 Ser - Adam Equipment UG119 User Manual

EN
6.2 SETTING AUTO OFF
An automatic power down time can be set so that the MUW turns off after a
period where no activity is detected. This preserves the life time of the battery
when used in this mode.
Settings are OFF, 5, 10, 20, and 30 minutes.
1) Switch on the scale then press the [kg/lb] key during the self-checking
test of the display.
2) The display will show the first function
3) Press the [kg/lb] key to select
the current setting, default is 10.
4) Press the [Print] key to change the setting for the backlight and press
[Zero] to save, then [kg/lb] to select the next parameter.
6.3 SETTING THE PRINTING CONTROLS
The MUW can be set to automatically print "AUTO", or print on demand "PrN"
by pressing the [Print] button.
The data transmission speed "Bps" of the MUW must match that of the Printer
or other device being used to collect data information successfully.
The printing control and speed can be selected as follows.
1) Switch on the scale then press the [kg/lb] key during the self-checking
test of the display.
2) The display will show the first function
3) Press the [kg/lb] key to select
the current printing control setting "UArt".
4) Either printing on demand (PrN), pressing the [Print] key following a
weighing, or printing automatically (AUTO), automatically prints out
when a stable reading and BMI calculation is displayed can be selected.
© Adam Equipment Company 2012
F2 F2 F2 F2 OFF OFF OFF OFF
F1 F1 F1 F1 EL. EL. EL. EL.
F2 F2 F2 F2 OFF OFF
OFF OFF and then [Zero] to enter and show
F F F F 3 3 3 3 SE SE SE SE
F1 F1 F1 F1 EL. EL. EL. EL.
F F F F 3 3 3 3 S S S S and then [Zero] to enter and show
ER ER ER ER
10
R R R R
700660229revA-Jul12