Setting The Printing Parameters; Selecting The Communication Port; Setting The Print Mode; Setting The Baud Rate - Adam Equipment ACBplus Series Service Manual

5.3

SETTING THE PRINTING PARAMETERS

When " " is displayed, press [Zero] to view the first printing parameter.

5.3.1 Selecting the communication port

• The selected port, for example "
• Press [Mode] to cycle through the other options. The user can select
"
232 interface is available and the scale is set with this port only.
• Press [Zero], to view the next printing parameter.

5.3.2 Setting the print mode

• The current setting of the print mode is displayed,
• Press [Mode] to cycle through the other options.
• The following options are available:
• Press [Zero], to view the next printing parameter.

5.3.3 Setting the baud rate

• The current baud rate setting will be displayed.
• Press [Mode] to cycle through the other options.
• The following settings are available:
• Press [Zero] to view the next printing parameter.
@Adam Equipment Company 2005
" or " " as the communication port. Currently, only RS-
The scale sends
communication port, whenever the [Print] key is pressed.
It will set the RS-232 interface to print the weights
continuously and the accumulation function is disabled.
The weighing results will be sent to the communication port
automatically whenever a weight is placed on the platform.
(default value)
10
" will be displayed.
the accumulated weights to the