Printing And Outputting The Results; Clearing A Previous Result - Adam Equipment MUW 300L User Manual

5.6

PRINTING AND OUTPUTTING THE RESULTS

If a printer or other data collection device is being used the results will be sent
automatically or manually depending on the printing control set up. The data
transmission speed must be set correctly to allow the results to be received.
The Doctor and patients identity number can be programmed into the Indicator to
give you a traceable record which also records date and time.
To enter the Doctors Id press and hold the [Print] key for 2 seconds. The display will
show as below, use the [Print] and [Clear] keys to move the flashing digit and the
[kg/lb] and [cm/ft] keys to enter the Id number you require and press [Zero] to
save.
The display will now show the Patients Id screen, use the keys as above to set the Id
number and press [Zero] to save and exit back to normal weighing.
See section 6.3 and 6.4 for printing controls and data transmission speed options
5.7

CLEARING A PREVIOUS RESULT

Once the results have been calculated and displayed they will remain displayed until
the [Clear] key is pressed. When the patient has stepped off the platform and the
results have been recorded or printed, the [Clear] key can then be pressed which
will return the display to zero ready for the next patient to be weighed.
All manuals and user guides at all-guides.com
9
© Adam Equipment Company 2012