Table of Contents
Advertisement
5. Communication Software Control Guide
How to Connect Windows Control Program by LAN Interface
The fifth step: Open windows control software, click
Interface display as below:
Select [Enternet]:
Input equipment IP address, click [OK].
Click
corner of the control software interface) is green, and log outputs
information smoothly, then you would control the device through PC
software.
VSP 198CVS
Click properties,
，
equipment IP address to the same band with
that of computer 192.168.0.XXX；
to open the serial port, if the [Comm] button (in the lower-right
User Manual
，
， Now we can revise the
ico,
85
Advertisement
Table of Contents
Need help?
Do you have a question about the VSP 198CVS and is the answer not in the manual?
Questions and answers