Configuring Fluidics Software; Configuring Fluidics Software (Stations And Properties) - Molecular Devices ImageXpress Micro User Manual

Configuring Fluidics Software (Stations and Properties)

5014166 D
To use the ImageXpress
stations and properties.
Note: The Configure Fluidic Stations functions are available at Devices
> Configure Fluidic Stations, in the simplified menu, Control >
ImageXpress > Configure Fluidics Stations, and from the Configure
Stations option from Plate Acquisition Setup > Configure > Fluidics.
This section details the Plate Acquisition Setup > Fluidics > Configure
location, but the procedures are the same if you access the functions
from the menu.
To configure fluidics software
1. In the MetaXpress Software, click Screening > Plate Acquisition
Setup.
Figure 2-3: Plate Acquisition Setup dialog
Fluidics option, you must configure fluidics
®
Fluidics Option Operations
35