Displaying Ipv6 - Cisco Catalyst 3560-X Software Configuration Manual

Chapter 1 Configuring IPv6 Unicast Routing

Displaying IPv6

For complete syntax and usage information on these commands, see the Cisco IOS command reference
publications.
Table 1-2 Commands for Monitoring IPv6
Command
show ipv6 access-list
show ipv6 cef
show ipv6 interface interface-id
show ipv6 mtu
show ipv6 neighbors
show ipv6 ospf
show ipv6 prefix-list
show ipv6 protocols
show ipv6 rip
show ipv6 route
show ipv6 routers
show ipv6 static
show ipv6 traffic
Table 1-3 Commands for Displaying EIGRP IPv6 Information
Command
show ipv6 eigrp [as-number] interface
show ipv6 eigrp [as-number] neighbor
show ipv6 eigrp [as-number] traffic
show ipv6 eigrp topology [as-number | ipv6-address]
[active | all-links | detail-links | pending | summary |
zero-successors]
Table 1-4 Commands for Displaying IPv4 and IPv6 Address Types
Command
show ip http server history
show ip http server connection
show ip http client connection
show ip http client history
OL-25303-03
Purpose
Display a summary of access lists.
Display Cisco Express Forwarding for IPv6.
Display IPv6 interface status and configuration.
Display IPv6 MTU per destination cache.
Display IPv6 neighbor cache entries.
Display IPv6 OSPF information.
Display a list of IPv6 prefix lists.
Display IPv6 routing protocols on the switch.
Display IPv6 RIP routing protocol status.
Display the IPv6 route table entries.
Display the local IPv6 routers.
Display IPv6 static routes.
Display IPv6 traffic statistics.
Purpose
Displays information about interfaces configured for EIGRP IPv6.
Displays the neighbors discovered by EIGRP IPv6.
Displays the number of EIGRP IPv6 packets sent and received.
Displays EIGRP entries in the IPv6 topology table.
Purpose
Display the previous 20 connections to the HTTP server, including the IP
address accessed and the time when the connection was closed.
Display the current connections to the HTTP server, including the local and
remote IP addresses being accessed.
Display the configuration values for HTTP client connections to HTTP
servers.
Display a list of the last 20 requests made by the HTTP client to the server.
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
Displaying IPv6
1-39