Configuring Pim - Cisco Catalyst 3560-X Software Configuration Manual

Chapter 1 Implementing IPv6 Multicast
Resetting the MLD Traffic Counters
Beginning in privileged EXEC mode, follow these steps:
Command
Step 1 clear ipv6 mld [vrf vrf-name] traffic
Example:
Switch# clear ipv6 mld traffic
Step 2 show ipv6 mld [vrf vrf-name] traffic
Example:
Switch# show ipv6 mld traffic
Step 3 copy running-config startup-config
Clearing the MLD Interface Counters
Beginning in privileged EXEC mode, follow these steps:
Command
Step 4 clear ipv6 mld [vrf vrf-name] counters
interface-type
Example:
Switch# clear ipv6 mld counters Ethernet1/0
Step 5 copy running-config startup-config

Configuring PIM

This section explains how to configure PIM.
Configuring PIM-SM and Displaying PIM-SM Information for a Group Range
Beginning in privileged EXEC mode, follow these steps:
Command
Step 1
configure terminal
Step 2
ipv6 pim [vrf vrf-name] rp-address ipv6-address
[group-access-list] [bidir]
Example:
Switch(config)# ipv6 pim rp-address
2001:DB8::01:800:200E:8C6C acc-grp-1
OL-25303-03
Purpose
Resets all MLD traffic counters.
Displays the MLD traffic counters.
(Optional) Save your entries in the configuration file.
Purpose
Clears the MLD interface counters.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Configures the address of a PIM RP for a particular group range.
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
Implementing IPv6 Multicast
1-19