Changing Directories And Displaying The Working Directory - Cisco Catalyst 3560-X Software Configuration Manual

Working with the Flash File System
To display information about files on a file system, use one of the privileged EXEC commands in
Table
Table 1-2 Commands for Displaying Information About Files
Command
dir [/all] [filesystem:][filename]
show file systems
show file information file-url
show file descriptors
To display information about the driver text object in the CISCO-MEMORY-POOL-MIB, use the show
memory privileged EXEC command:
Switch# show memory
Processor
Driver te

Changing Directories and Displaying the Working Directory

Beginning in privileged EXEC mode, follow these steps to change directories and to display the working
directory.
Command
Step 1
dir filesystem:
Step 2 cd new_configs
Step 3 pwd
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
1-4
Appendix 1
1-2:
Description
Display a list of files on a file system.
Display more information about each of the files on a file system.
Display information about a specific file.
Display a list of open file descriptors. File descriptors are the internal representations
of open files. You can use this command to see if another user has a file open.
Head Total(b)
2BF1A9C 205661540
I/O F000000 16769024
1800000 4194304
Purpose
Display the directories on the specified file system.
For filesystem:, use flash: for the system board flash device.
Change to the directory of interest.
The command example shows how to change to the directory named
new_configs.
Display the working directory.
Working with the Cisco IOS File System, Configuration Files, and Software Images
Used(b) Free(b)
43619116 162042424
10503052 6265972
44 4194260
Lowest(b) Largest(b)
160085888 159736648
6132844 6127744
4194260 4194260
OL-25303-03