IBM 1130 User Manual page 121

Computing system

Hide thumbs Also See for 1130:

Table of Contents

The recommended maximum distances between

fastenings are:

1 to 5 inches

5-1/2 to 11 inches

11 to 14 inches

14 to 17 inches

Maximum Distance

between Fastenings

8-1/2 inches

For forms more than 17" in length, the max-

imum distance between stitches should be deter-

mined by actual test.

staples are used, they must:

Be located out of the printing area.

Be properly crimped so they won't catch on

guide edges or staples in succeeding forms.

Not cause excessive bulging during feeding,

particularly at the out-fold.

Form types. Depending on its purpose and des-

tination, the form on which a report is printed may

range from the least expensive blank stock to cus-

tom design. Imprinted stock forms are standard-

size forms which are stocked in large quantities

and upon which lines, headings, markings and some

designs are printed as desired. Custom forms are

those designed to fill special needs of size, com-

plexity, and design. Although more expensive, they

can be used advantageously to "sell" your company.

Chapters

Table of Contents