Displaying Graphs & Statistics (Model T - Elcometer 130 User Manual

8 DISPLAYING GRAPHS & STATISTICS (MODEL T)
8.1 BAR GRAPH
The Bar Graph displays an analogue representation of the reading
together with the highest, lowest and average reading as
measurements are taken. To display the Bar Graph:
1 Press the Display softkey and select "Readings & Bar Graph"
4
If a reading is outside set limits, the white bar and the reading
value turn red.
8.2 RUN CHART
To display the Run Chart of the last 20 readings:
1 Press the Batch softkey
2 Select "New Batch" or "Open Existing Batch"
3 Press the Display softkey and select "Readings & Run Chart"
4
Red points signify a reading outside the batch's limits (if set)
8.3 BATCH GRAPH
To display the Batch Graph:
1 Select the appropriate batch name from Batch/Review Batch
2 Select "Batch Graph"
4
Red columns signify a reading outside the batch's limits (if set)
4
Press the Zoom+ softkey followed by ç
www.elcometer.com
or è
to review individual readings as required
R
12