Daikin DCM601A51 Commissioning Manual page 43

(1)
2. is an air conditioner list displaying all Group Addresses. When no management points are
registered, columns other than Group Addr. are displayed blank.
The displayed contents are as indicated in the table below.
Column
Group Addr.
Name
OD-Unit Addr.
Changeover Option
Err Code
Connection
Type
*1 See the table below for the correspondence between the content displayed in the Changeover Option column and its meaning.
*2 Comm Err : Group address of the connected unit with communication error.
N/A : A group address not registered as a management point.
Maintenance : A group address of a connected unit under maintenance.
Changeover
Option
Able Unit with Changeover Option.
N/A There is an indoor unit with Changeover Option within the same refrigeration system.
Selectable There are no indoor units with Changeover Option within the same refrigeration system.
--- Connection is "N/A" or Type is other than "Indoor".
3. Select the indoor unit for which you want to set the Changeover Option from
Settings button (2). The Changeover Option becomes "Able". At that moment, the Changeover
Option for the other indoor units in the same refrigeration system becomes "N/A".
4. Select the indoor unit for which you want to release the Changeover Option from
the Release button (3). The Changeover Option becomes "Selectable". At that moment, the
Changeover Option for the other indoor units in the same refrigeration system also becomes
"Selectable". Touching the Refresh button
screen using the Close button.
Displayed information
Group address number
Displays the name of the
connected unit.
Refrigeration system number of
the connected unit.
"----" is displayed for units for
which the refrigeration system
number could not be acquired.
Whether Changeover Option is
available or not for the connected unit.
Error code detected in the connected unit.
Blank when there are no errors.
Unit connection status
Blank when normal.
Type of the connected unit.
Blank when type is not
registered.
Meaning
(4)
Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
1:1-00 to 8:4-15
Characters permitted by Mgmt. Point Data
Able / N/A / Selectable / ----
Possible Error Code values
Comm Err / N/A / Maintenance
Indoor / Ventilator / Chiller / Dio
[Legend] : Not greyed out ×: Greyed out
updates the contents displayed in (1). Close the
Value range
Register.
0 to 127/----
*1
*2
Availability for selection
Release Setup button
button
×
× ×
×
× ×
(1)
and touch the
(1) and touch
42