Daikin DCM601A51 Commissioning Manual page 12

(4) Dealer Option
Enables/Disables dealer options.
(5) Time Zone
Sets up the difference between the Universal Time Coordinated (UTC) and local time.
(6) History Mgmt. (Delete)
Deletes history records of a specified period from the history.
(7) Other Setting
Enables/Disables the "Detect Level" and "Dry Operation Mode".
Detect Level: When enabled, indicates management point error alarms via icons and history.
Dry Operation Mode: When enabled, allows you to set Dry mode from the touch panel, the
Schedule or Interlocking function.
(8) DIII-NET Engineering
Sets up the iTM as Main or Sub. When an upper central controller is also installed, sets Setpoint
Restriction to "Enable" or "Auto".
NOTE
The "Auto" option automatically Enables/Disables Setpoint Restriction depending on whether
an upper central unit is installed or not.
(9) Changeover Option
Enables/Disables the Changeover Option for an air conditioner.
(10) Layout Setup (Optional function)
Displayed only when Layout View data exists.
Allows you to Enter/Output Layout View data.
(11) Contact Info
Sets up contact information (three lines) for inquiries regarding errors in the system and the like.
(12) Outdoor Setup
Allows you to manually register the indoor units that belong to the refrigeration system of each
outdoor unit based on the indoor and outdoor unit's installation information.
Also, allows you to automatically check leakage for each refrigeration system in a multi-refrigeration
system. You can also make it run at a set time by using the Schedule function.
(13) Energy Navigator (Optional function)
Sets up the reference room temperature, month to start collecting data, and energy conversion type
to be used by the Energy Navigator.
11 Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager