Daikin DCM601A51 Commissioning Manual page 20

5. Checking the setting results
Touching the Check button
check results on the Information check screen.
If an error is found, discards the edited content retained until then and restores the saved original data.
"No error" is displayed if no error is found. Touch the Close button to close the screen.
Check items list
Classification Check item
Duplicated
management point
Excess of total number of
other management points
Excess of number of
Common
chiller management points
Excess of number of
outdoor management points
Excess of total number
of Internal Pi
management points
Duplicated D3
DIII
addresses
Duplicated port
Di, Pi
numbers
Ai reference
Internal Ai management point
Duplicated port
Internal Pi
numbers
BACnet Duplicated object IDs
19
(13)
checks the content of the current settings data and displays the
[Management point name] ([Management point ID]) <-> [Management point name] ([Management point ID])
names
[Management point name] ([Management point ID]) <-> [Management point name] ([Management point ID])
[Management point name] ([Management point ID]) <-> [Management point name] ([Management point ID])
Ai:[Management point name]([Management point ID]):
Ai:[Management point name]([Management point ID]):
error
[Management point name] ([Management point ID]) <-> [Management point name] ([Management point ID])
[Management point name] ([Management point ID]) <-> [Management point name] ([Management point ID])
Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
Message
===== Mng. point name duplication
===== Mng. point name duplication
Mgmt. points exceeded (Other)
Chiller Mgmt. Pnt
Outdoor Unit Mgmt. points exceeded
Internal Pi Mgmt. point exceeded
===== D3 address duplication
===== D3 address duplication
===== Di/Pi address duplication
===== Di/Pi address duplication
The reference Mng. point is inaccurate
Analog type error [Invalid]
===== Internal Pi address duplication
===== Internal Pi address duplication
===== Duplicate object IDs
===== Duplicate object IDs