Daikin DCM601A51 Commissioning Manual page 27

• Dio Tab
Sets up the Dio.
Displayed items vary depending on the management point type.
(26)
(31)
(32)
(28)
(26) Point Type radio button
Select the Di Point Type from A type and B type.
(27) Operation Mode radio button
Select the Di operation mode from Normal and Equipment error input.
(28) Error input masking time after start signal radio button
Select an Error Mask Time after operation input from 10 and 30 seconds.
Start up error occurs if the external Di or external Dio cannot start even after the time set up here
elapses from the moment the Start signal has been received.
(29) Monitor Input radio button
Select whether to carry out error detection when the external Di or external Dio is off from Enable
and Disable.
(30) Error input type radio button
Select the error input detection from A type and B type.
(26)
(27)
<Di>
(29)
(30)
<External Dio>
Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
(26)
(28)
(29)
(30)
<External Di>
(33)
(34)
26