Daikin DCM601A51 Commissioning Manual page 101

8. To connect to the iTM via the Internet, ask its IP address and subnet mask to your network
administrator and set them up.
Set them up as follows when connecting to the iTM via local network.
IP address: 192.168.0.2 Subnet mask: 255.255.255.0
NOTE
For iTM settings at the time of shipment, see page 96.
9. Check that the settings are correct and click [OK] to close the [Internet Protocol Version 4 (TCP/
IPv4) Properties] and [Local Area Connection Properties] screens.
Click [Close] to close the [Local Area Connection Status] screen and finish setup.
Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
100