Daikin DCM601A51 Commissioning Manual page 112

5. Setting up display language
Set up the display language used throughout the iTM integrator setup screens.
<Language Settings screen>
1. Touch the desired language from those listed on the screen.
The radio button next to the language you touched is now selected.
2. Touch OK.
The Locale Settings screen appears.
NOTE
If the message "Turn ON Battery Backup switch" appears instead of the Locale Settings
screen, it means that you did not turn on the data backup battery. If so, refer to the step 3 on
the previous page to turn on the data backup battery. When done, touch the OK button
shown with the message on the screen. Then, the Locale setup screen appears.
111 Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager