Logging Into Service Mode - Daikin DCM601A51 Commissioning Manual

2-2 Logging into Service Mode

To run engineering, you must log into the Service (SE) Mode from the Menu List screen.
In the SE Mode, the Service Settings tab, which is normally hidden, is displayed on the Menu List.
Also, special buttons available only in SE Mode are displayed on the tabs.
The following describes how to log into the SE Mode.
1. Display the Menu List screen.
(1)
(3)
(2) (4)
2. Touch the four corners of the screen in the indicated order. The Password Input dialog appears.
3. Enter the service password (daikin) and touch the OK button to log into the SE Mode.
7 Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager