P2P Interface Card Running Status Check; Tdm Interface Card Running Status Check - Zte ZXA10 C300 Maintenance Manual

ZXA10 C300 Maintenance Manual
Indicator
ACTi (i = 1 – 8)/1
– 8/X1 – X2

2.2.7 P2P Interface Card Running Status Check

The ZXA10 C300 uses the FTGK
Table 2-14
Table 2-14 Indicator Description of P2P Interface Card
Indicator
RUN
LEDi (i = 1 - 48)

2.2.8 TDM Interface Card Running Status Check

The ZXA10 C300 uses the following
l
STM-N circuit emulation interface card: CTLA
l
E1 circuit emulation interface card: CTUB
SJ-20130520164529-008|2013-06-30 (R1.0)
Status
Green LED is OFF.
Green LED is ON.
Green LED flashes.
describes the indicators of the P2P Ethernet interface card.
Status
OFF
Green LED is ON.
Green LED flashes quickly.
Green LED flashes slowly
every two seconds.
Red LED is ON.
Red LED flashes slowly
every two seconds.
Yellow LED flashes slowly
every two seconds.
Green LED is OFF.
Green LED is ON.
Green LED flashes.
Description
The optical interface is not connected.
The optical interface is connected (LINK).
The optical interface is sending and receiving the
data (ACTIVE).
P2P interface card.
Description
The card powers OFF or
The card self-checking completes but fails to
receive data from the control and switching card
or NM.
The card is downloading data from the switching
and control card or NM.
The card is working properly.
Card hardware failure
The card should not be inserted in this slot.
The software version of the card does not match
that of the control and switching card. Auto-update
is not configured on the card.
The optical interface is not connected or the link
is not established
The optical interface is connected (LINK).
The optical interface is sending and receiving the
data (ACTIVE).
TDM interface cards:
2-12
CPU is not started.
ZTE Proprietary and Confidential