Common Interface Card Running Status Check; Power Interface Card Running Status Check - Zte ZXA10 C300 Maintenance Manual

ZXA10 C300 Maintenance Manual
Indicator
ALM

2.2.9 Common Interface Card Running Status Check

The ZXA10 C300 uses the CICK common interface card.
Table 2-17
Table 2-17 Indicator Description of the CICK Card
Indicator
RUN
ETH

2.2.10 Power Interface Card Running Status Check

ZXA10 C300 uses the PRWG power interface card.
Table 2-18
Table 2-18 Indicator Description of Power Interface Card Panel
Indicator
PWR
RUN
SJ-20130520164529-008|2013-06-30 (R1.0)
Status
Green LED flashes slowly
every two seconds.
Red LED is ON.
Red LED flashes slowly
every two seconds.
Yellow LED flashes slowly
every two seconds.
OFF
Green LED is ON.
Red LED is ON.
Yellow LED is ON.
describes indicators of the CICK card panel.
Status
Green LED flashes slowly.
Red LED is ON.
Green LED is ON.
Green LED flashes .
lists the indicator descriptions of the power interface card panel.
Status
Green LED is ON.
Green LED is ON.
Description
The card is working properly.
Card hardware failure
This card should not be inserted in this slot.
The software version of line card does not match
that of the switching and control card. The service
is normal.
Tributary is not configured on NM.
Tributary is normal.
High order alarm occurs on service line from TAA
to 2M card.
The configured tributary E1 line alarm occurs.
Description
The card is working properly.
The card hardware failure
The interface connection is proper, but no data is
sending or receiving.
The interface is sending or receiving data.
Description
External power input is available.
The card is running properly.
2-14
ZTE Proprietary and Confidential