Upgrading Versions - Zte ZXA10 C300 Maintenance Manual

6.2 Upgrading Versions

The ZXA10 C300 supports upgrading the version though the NMS and CLI mode.
This procedure introduces how to upgrade the version in CLI mode.
Prerequisite
l
The version files for upgrading are saved under the specified directory when the FTP
tool is configured.
l
The FTP services on the ZXA10 C300 device have been configured.
l The NE data of the ZXA10 C300 device has been backed up.
l The NE
the upgrade. If there is any, clear the fault first and then upgrade the NE.
Steps
1. Download version files.
ZXAN#file download version scxn.bt
Downloading from host(10.1.1.1)
Transfering file SCXN.BT ...
........Successfully
Synchronizing file scxn.bt to slave board...
.............Successfully
ZXAN#file download version *
2. (Optional) Synchronize version file to the active control and switching card to the
standby control and switching card.
ZXAN#file sync version
If the standby card is in the standby status, the version is automatically synchronized
to the standby card.
3. View downloaded version files.
ZXAN#show version-saved master
PhyLoc FileName
--------------------------------------------------------------------------------
1/1/10 bsp.mvr
1/1/10 gtghg.bt
1/1/10 gtghg.fw
1/1/10 gtghg.mvr
SJ-20130520164529-008|2013-06-30 (R1.0)
to be upgraded must not have any major alarm, otherwise it may influence
Note:
VerType VerTag
MVR
BT
FW
MVR
//Download a file.
//Download all version files.
BuildTime
v1.0 2012-09-27 10:16:13 1212669
V4.0.0 2013-01-30 16:54:16 524288
V2.0.0 2013-09-23 01:14:49 78842
V2.0.0 2013-09-23 01:14:48 4939176
6-5
Chapter 6 Version Upgrade Guides
Length
ZTE Proprietary and Confidential
Active