Switching And Control Card Running Status Check - Zte ZXA10 C300 Maintenance Manual

Table 2-4 Fans Running Status Check
Item
Meters
Check method
Standard requirements
Troubleshooting
Card Running Status Check
The LED
Table 2-5
Table 2-5 Card Running States Check
Item
Meters
Check method
Standard requirements
Troubleshooting
You can also check card running status through indicators on the card panel.

2.2.3 Switching and Control Card Running Status Check

The ZXA10 C300 uses the following switching and control and cards:
l
TM-level switching and control card: SCTM
l
Type-N switching and control card: SCXN
Table 2-6
Table 2-6 Indicator Description of Control and Switching Cards
Indicator
RUN
SJ-20130520164529-008|2013-06-30 (R1.0)
Step
None
Check the running status of the fans with the show fan command. If
the equipment room is at the local place, observe the fan running
status directly and keep a record.
The fan runs properly.
If the fan is faulty, inform the maintenance personnel to repair it.
states indicate the card running status.
lists the card running states check information.
Step
None
Check the running status of the cards with the show card command.
If the equipment room is at the local place, observe the fan running
status directly and keep a record.
The cards run properly.
If the card is faulty, inform the maintenance personnel to repair.
lists the indicator descriptions for the control and switching cards.
Status
OFF
Green LED flashes slowly.
Green LED is ON.
Green LED flashes quickly.
Red LED is ON.
Chapter 2 Routine Maintenance
Description
The card is not powered on or
The card works properly and card type
configuration is correct.
The card is not configured.
The card is downloading data.
Card hardware failure
2-5
ZTE Proprietary and Confidential
CPU is not started.