P2P Interface Card - Zte ZXA10 C320 Hardware Description

ZXA10 C320 Hardware Description

2.3 P2P Interface Card

Overview
The FTGK card is a 48-port
fiber for transmitting and receiving.
Panel
Figure 2-6
Figure 2-6 FTGK Panel
Indicator
Table 2-10
Table 2-10 FTGK Indicator Description
Indicator
RUN
SJ-20130520170233-004|2013-08-31 (R1.0)
P2P interface card. It uses
shows the FTGK panel.
describes the indicators of the FTGK card.
Status
LED is OFF.
Green LED is ON.
Green LED flashes
quickly.
Green LED flashes
slowly (0.5 Hz).
Red LED is ON.
Red LED flashes
slowly (0.5 Hz).
Yellow LED flashes
slowly (0.5 Hz).
WDM
Description
The card is powered off, or
l
The card passes the self test, but fails to obtain data
from the switching and control card or NMS.
l The card is running the booting program, or is
downloading a software version from the switching
and control card.
l
The card cannot operate because there is no legal
software version.
The card is downloading data from the switching and
control card or the NMS.
The card runs properly.
l A serious fault occurs to the hardware of the card (such
as, the card fails to pass the self test, or the software
version is incompatible with the hardware version).
l
The NMS is sending a restarting command.
This card should not be inserted in this slot (different from
the configuration of the NMS).
The software version of the card is incompatible with that
of the switching and control card (auto-update function is
not configured on the card). The services are proper.
2-8
ZTE Proprietary and Confidential
technology and single optical
CPU is not started.