Operating The Controls For Mowing - OREC GRH537Pro Owner's Manual

■Operating the controls for mowing

Please read the safety guidelines again (pps. 4-10) and check the precautions related to your work
environment and safety.
NOTICE
When using the machine for the first time, choose a flat area free from rocks and foreign
●
objects and slowly cut a path by going over the area in a straight line.
If the engine stops dues to a large quantity of grass, reduce your work speed and increase the
●
cutting height before mowing for a second time.
If debris is frequently thrown from the blade cover, raise cutting height.
●
Start in speed 1 and then work at a speed suited for your surroundings after checking
●
that the area around you is safe.
Start the engine, then slide the throttle lever
1.
BLADE CONTROL LEVER
Press the Blade Safety Lock forward and
hold, then pull back the Blade Control Lever.
3.
Caution: Blade rotation will start
WARNING
Always be sure to release the blade clutch [OFF] when turning. Not doing so may cause
●
injuries or accidents.
DO NOT try to change speeds with the drive clutch lever [ON] as this can cause injuries
●
and accidents.
HI
to the [HI] position.
BRADE SAFETY LOCK
immediately.
1ST
2ST
3ST
Choose your desired speed
GR537Pro: 3 speeds.
2.
GRH537Pro: Vary the speed by sliding
the speed change lever forward.
Push the Drive Clutch Lever forward and
4.
then hold it to the handle.The machine
will start driving.
20
SPEED CHANGE
LEVER
DRIVE CLUTCH LEVER