4
BIOS and Driver
4.1 BIOS Settings
The board uses UEFI BIOS that is use Serial Peripheral
Interface (SPI) Flash. The SPI Flash contains the BIOS
Setup program, POST, the PCI auto-configuration utility,
LAN, EEPROM information, and Serial port support. The
BIOS setup program is accessed by pressing the <Del>
key after the Power-On Self-Test (POST) memory test
begins and before the operating system boot begins. The
menu bar is shown below.
4.1.1 Main Menu
©Vecow ABP-2000 Series Advanced Box PC User Manual
Figure 4.1: BIOS Menu Bar
BIOS and Driver
40
Figure 4.1.1: BIOS Main screen
System Time / Date : Press "TAB" key to switch sub-
items of value .Then press " +" key or "-" key number
key for modify value.
In this page , you could make sure you CPU type and
DRAM type that you are install into this system.
4.2 Advanced Function
4.2.1 ACPI Setting
Figure 4.2.1: ACPI Setting setup screen
BIOS and Driver
41