UAZ PATRIOT Operation Manual page 78

For your convenience, make the adjustments with the door
open.
The driver's seat in some motor vehicle configurations is
equipped with a lumbar support mechanism and seat height
adjustment.
Lever 4 for adjustment of the lumbar support is located on the
inner side surface of the backrest. Turning the lever forward or
backward results in a corresponding change of the convex section
in the lower part of the seat backrest, providing comfortable
support for the lumbar part of the spine.
In order to raise the driver's seat, pull up handle 2 several
times until it is set to the desired height. To lower the driver's
seat, pull down handle 2 several times until it is set to the desired
height.
For your convenience, make the adjustments with the door
open.
Rear triple seat (Fig. 3.24) consists of pillows and backrests
for one and two passengers.
In order to increase the space of the luggage compartment,
the rear seat can be folded down and every part of the seat can
be unfolded separately. Unfolding of the rear seat is performed
as follows:
- pull the loop 1 (Fig. 3.24) and set the pillow to the upright
positions;
Fig. 3.24. Rear three-seater seat:
1 — releasing and raising loop of the rear seat cushion; 2 — seat
squab headrest 3 — rear seat squab release lever
78