UAZ PATRIOT Operation Manual page 64

Handle 1 (Fig. 3.12) controls the motoreducer of the choke
flap which helps to control air temperature at the climate
control unit output ("Manual" mode / controls the interior air
temperature ("AUTO" mode)). The current position of the switch
is shown by marker 5 on the moving part of the handle.
When the "Manual" operation mode is switched on, turning
right (clockwise) increases the air temperature at the climate
control unit output. When turning left (counter-clockwise), the
temperature at the climate control unit output decreases.
The switch has nine fixed positions: temperature minimum
value, temperature maximum value and seven intermediate
values between them.
In positions from 5 to 9, an additional electric pump of the
heater is switched on if there is no signal from the A/C switch
to turn on the A/C.
In "AUTO" mode, the switch controls the air temperature,
which is automatically maintained in the motor vehicle interior.
Handle 2 (Fig. 3.12) controls the distribution of air currents
(controls the motoreducer of the front and rear heater flaps).
Current position of the switch is shown by marker 5 on the
moving part of the handle.
The switch has five fixed positions. Each position corresponds
to a specific distribution of air currents in the motor vehicle
interior:
— windscreen air cooling;
— windscreen and feet air cooling;
— interior air cooling via deflectors, if flaps are open;
— feet air cooling;
— interior and feet air cooling via deflectors, if flaps
are open.
Direction of the air current can be changed via small levers
2 (Fig. 3.13) on the deflectors.
Control elements
64