UAZ PATRIOT Operation Manual page 51

It is prohibited to operate the system if there is a possibility
of the ingression of corrosive liquids, acids, water, oil and petrol
in the CU, DSDM and RCP.
System functions:
- central locking and unlocking with the key;
- central door locking and unlocking from the inside of
interior;
- door locking and unlocking from the RCP depending on
the motor vehicle package;
- side door window lifting and lowering control;
- outside rear view mirror position adjustment control;
- interior lighting control (polite lighting) depending on the
motor vehicle package;
- intrusion alarm system;
- motor vehicle search in an unlighted parking place;
- "Panic" signalling and prompt alarm;
- system trouble diagnosis through the motor vehicle data
link connector.
Control System Operation Procedure
Door locks locking and armed mode switching on using the RCP
To lock door locks and switch armed mode ON it is necessary
to short press button 3 (Fig. 3.13) on the RCP. All side door
locks and the lock of the T/gate are locked, the system switches
over to the armed mode that is indicated by a single blink of
the T/signals and a slow blinking of the signal device system in
the cluster .
If any door, the cowl or the T/gate are opened when switching
armed mode on, the T/signals blink three times and a single horn
is given. In order to include the opened areas into the security
zone they must be closed.
Fig. 3.13. Key with remote
control panel:
1 — emission confirmation and
control panel battery discharge
indicator; 2 lock unlocking and
alarm switching off button; 3 —
lock locking and alarm switching
on button; 4 — horn button
51