UAZ PATRIOT Operation Manual page 174

Bolts and nuts of gearbox and transfer case
Nuts and bolts of propeller shaft flanges
Pin nut 8-10
Bolts of axle housing caps
Bolts of front axle hub flanges and rear axle shafts flanges
Ball struts bolts
Steering mechanism bolts
Nuts of steering trapezium ball studs
Tie rods locknuts
Nuts of steering system universal joints
M8 bolt of steering system propeller shaft
M10 bolt of steering system propeller shaft
Nut of steering system drag link
Front wheels journal bolts
Bolts of rear brake shields
Nuts of manifolds and brake hoses:
when screwing into aluminum, brass
and cast iron details
when screwing into steel details
Bypass valves of rear brakes wheel cylinders,
of front brakes crankcases, of proportioning valve
and of switch working cylinder for clutch
Switch working cylinder with plastic housing
Bolts of front disc brakes
Bolts of brake system proportioning valve and
coupling bolt nut of proportioning valve drive end
Bolt and locknut of drive flexible lever in brake
system proportioning valve, nut of drive lever axle
Nut of drive lever (in brake system proportioning
valve) to axle bracket and nut of end to pillar
Nut of longitudinal levers and suspension control arm
Spring U-bolts nuts
Nuts of spring axle
Nuts of spring studs
Wheel nuts
Adjusting nuts and locknuts of wheel hubs bearings
Lamp clusters nuts
Nuts of delphi power steering hoses
Nut of front spring joint
Steering wheel nut
Screws of locks and door locks catches
Note. Use the following tightening torque for other threaded couplings:
M6 — (0,45-1,0) kgf•m;
M8 — (1,4-1,8) kgf•m;
M10 — (3,0-3,5) kgf•m;
M12 — (5,0-6,2) kgf•m.
174
Annex 2 (end)
4,0-5,6
4,4-5,6
1,1-2,5
6,0-7,0
3,6-5,0
5,5-8,0
6,0-8,0
10,5-13,0
2,8-3,6
2,8-3,6
4,8-5,6
20-28
3,6-4,4
4,4-5,6
1,5-2,0
2,8-3,6
1,0-1,4
0,7-1,0
14-16
1,4-1,8
2,8-3,6
0,65-0,8
14-16
9-10
16-18
8,5-9,5
10-12
3,0-4,0
0,15-0,25
2,0-3,5
16-18
3,2-3,6
3,0-4,0