Table of Contents
Advertisement
To change the bulbs of high 3 and low 4 beams, remove cap
5. Disconnect the wire from lamps 3 and 4, release the ends of
the lamp spring pawl from slots and remove the lamp.
Install halogen lamps wearing gloves, do not touch the lamp
bulb. If the bulb has fat stains, remove them with alcohol.
front fog lamps. Adjust the front fog lights with screw 1
(Fig. 9.42), using S=5 or Torx T20 keys. Install the light into
the position in which the cutoff line coincides with line 1 (Fig.
9.43).
To replace front fog lights remove wiring harness connector 2
(Fig. 9.42) from the light, turn it counter-clockwise and remove
it.
Fig. 9.43. Screen marking for front fog lights adjustment:
H — distance between the headlamps center and the ground level; V-V — mo-
tor vehicle longitudinal axis projection; A-A, B-B — axes of headlamps centers
Fig. 9.42. Front fog light:
1 — adjusting screw; 2 — wiring harness
connector
160
Hide quick links:
Advertisement
Table of Contents
