Additional Information - Patton electronics SmartNode 4552 Quick Start Manual

You can check the connection with the ping command. For the example above ping 172.16.1.100 from a PC on
the IP network.
You may now start to configure the SmartNode from scratch using the CLI commands. For a detailed
description of the CLI refer to the SmartWare software configuration guide (SCG) available on the CD-ROM
and online at: www.patton.com/voip.
We recommend however that you start your configuration from a template. See step three for further details.
Download a configuration example, adapt to your network and load
onto the SmartNode
We recommend that you use an application specific configuration template called "Application Note" to start
your SmartNode configuration. A selection of Application Notes is available on the CD-ROM and online from
http://www.patton.com/voip/appnotes.shtml. Select an Application Note which matches your requirements.
Adapt the configuration as described in the Application Note to your network (do not forget to modify the IP
address) and copy the modified configuration to a TFTP server. The SmartNode can now load its configuration
from this server.
In this example we assume the TFTP server is running on the PC with the IP address 172.16.1.10 and the
configuration named SN.cfg in the root directory of the TFTP server.
172.16.1.100(cfg)#copy tftp://172.16.1.10/SN.cfg startup-config
Download...100%
172.16.1.100(cfg)#
You now need to reload the SmartNode to activate the downloaded startup configuration. Type in the
following commands.
Note that you MUST answer NO when asked to overwrite the startup configuration.
172.16.1.100(cfg)#reload
Running configuration has been changed.
Do you want to copy the 'running-config' to the 'startup-config'?
Press 'yes' to store, 'no' to drop changes : no
Press 'yes' to restart, 'no' to cancel : yes
The system is going down

Additional Information

For detailed information about configuring and operating guidance, set up procedures and trouble shooting,
refer to the SmartNode Series SmartWare Software Configuration Guide and the SmartNode Hardware Installation
Guide on the enclosed Patton VoIP CD-ROM or at http://www.patton.com/voip/. On the CD-ROM you will
also find numerous freeware and shareware tools, including TFTP servers, Telnet clients, etc.
4
SmartNode™