Compliance Information; Radio And Tv Interference; Ce Notice; Service - Patton electronics SmartNode 4520 series Getting Started Manual

Compliance information

Radio and TV interference

The SmartNode router generates and uses radio frequency energy, and if not installed and used properly-that
is, in strict accordance with the manufacturer's instructions-may cause interference to radio and television
reception. The SmartNode router have been tested and found to comply with the limits for a Class A comput-
ing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to pro-
vide reasonable protection from such interference in a commercial installation. However, there is no guarantee
that interference will not occur in a particular installation. If the SmartNode router does cause interference to
radio or television reception, which can be determined by disconnecting the unit, the user is encouraged to try
to correct the interference by one or more of the following measures: moving the computing equipment away
from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different
AC outlet (such that the computing equipment and receiver are on different branches).

CE notice

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromag-
netic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU).

Service

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All
returns must have a Return Materials Authorization number on the outside of the shipping container. This
number may be obtained from Patton Electronics Technical Services at:
• Tel: +1 (301) 975-1007
• Email: support@patton.com
• URL: www.patton.com
Note
Disconnect all power before servicing.
The SmartNode router contains no user serviceable parts.
The mains outlet that is utilized to power the equipment must be
within 1 foot (3 meters) of the device and shall be easily accessible.
Packages received without an RMA number will not be accepted.
7