How to install
Step 1 - Connecting the power and telephone line cords
Step A – Plug the supplied telephone
cord
into the jack on the rear of
ⓐ
Home Console Unit labeled LINE.
Disconnect your existing telephone line
from the telephone jack and insert the
one supplied with the system into the
telephone wall jack.
Step B – Plug the telephone into the
jack on the Home Console Unit labeled
. If you have an answering machine,
plug the answering machine into the
rear of the console first and then plug
the telephone into the answering
machine.
Step C – Plug the DC power adaptor
ⓑ
into the jack on the Home Console
labeled DC and then connect a power
outlet that is always on (not controlled
by a wall switch or timer).
Step D – Stand the antenna upright.
7