Storage; Cleaning - Derby cycle Pedelec Impulse Evo User Manual

Batteries are subjected to the requirements in hazardous
goods legislation. They may be transported by road by
private users without any further stipulations. When
transported by commercial third parties (such as by air,
freight forwarders and logistics firms), special requirements
of packaging and labelling must be observed. Please
contact your cycle dealer if you have any questions about
transportation.
5.4.3

Storage

1. Remove the battery from the Pedelec
2. Store the battery in a dry, not excessively warm room. The battery
should not be exposed to direct sunshine. The recommended storage
temperature range is 18 to 23°C.
A battery should not be stored when fully charged. A charge
level between 50 and 70% is ideal.
Because a battery loses energy very slowly, it should be
recharged every two to three months (six months at the
latest).
EN-52 Original User Guide | Pedelec Impulse Evo Version 1
5.4.4

Cleaning

WARNING
Remove the battery from the Pedelec before cleaning the cycle.
Unintentionally pressing the
represent a risk of injury.
CAUTION
When cleaning the cycle, ensure no water enters the battery. If it does,
electric shock may result.
When wiping down the battery, prevent touching the contacts as this
presents a risk of electric shock.
PLEASE NOTE
Do not spray the battery with a water hose or wash it with a high-
pressure cleaner. Although the components are sealed off, damage
to the battery may still result. Clean the battery with a slightly damp
cloth.
Do not submerse the battery in water. Although the components are
sealed off, damage may still result.
Do not use any cleaners which contain alcohol or solvent, or which
scour. No coarse sponges or brushes may be used either.
button and touching live parts