ASSEMBLY
Tool:
5mm Allen Wrench with Phillips
Screwdriver
Step 1
Place the magnetic treadmill in the upright position.
Remove six Washers (37) and six Bolts (40) from the Left/Right Stabilizer
Tubes (3L, 3R with the 5mm Allen Wrench with Phillips
Screwdriver provided.
Insert both Left/Right Stabilizer Tubes (3L, 3R) into the Stabilizer (4), and
secure using six Washers (37) and six Bolts (40) that were removed.
Tighten the bolts with the 5mm Allen Wrench with Phillips Screwdriver
provided.
8