Establishing A Communication; Receiving A Communication - Nortel M220E User Manual

MNPS8592XAA.qxd 6/12/00 10:25 Page 21

ESTABLISHING A COMMUNICATION

1 - Pick up the handset.
You hear the tone.
2 - Dial your correspondent's number.
You may talk when your correspondent answers.
Calling in Handsfree mode
1 - Press the key.
You hear the tone and the line busy light is on.
2 - Dial your correspondent's number.
When your correspondent answers, you can talk in Handsfree
mode at approximately 50 cm around the set.
• To move to discreet conversation and interrupt the Handsfree
function, pick the handset up from the base.
The loudspeaker is automatically off.
Note: in this case, you can have a confidential conversation
trought the handset. The integrated microphone and the loud-
speaker of the base are off.
• To return to Handsfree conversation, press
handset back on the base.
Note: in this case you must put the handset back on the base
becauce it is unusable. When you use Handsfree function, you
can't use the handset and inversely.
Calling the last number dialled (BIS)
The last number you dial is stored in the memory up to dial ano-
ther number.
• Pick up the handset or press
and then press
The line is seized and the number is dialled automatically.
• To delete the number stored in the
then press key and put the handset back on the base.

RECEIVING A COMMUNICATION

When a call arrives, the set rings,
• Pick up the handset or press
You can talk with your correspondent.
key,
key .
, pick up the handset,
key.
and put the
PAGE 21