Nortel M220E User Manual page 25

MNPS8592XAA.qxd 6/12/00 10:25 Page 26
USING WITH PUBLIC NETWORK
The calls log is associated with the "Caller identification" service
and used to store the calls which were received in your absence
and no answered (30 calls saved), except the no-identified calls.
Repeated calls from the same correspondent are stored once only
(the last one). When the log is full, a new call delete the older
(consulted or not consulted).
The flashing red lamp, indicates the presence of at least 1 call
which has not been consulted and the screen presents:
- the number of new calls (NEW),
- the number of stored calls (TOTAL).
Consulting the calls log
• Press the key.
When at least 1 new call is stored (**), the number of the first
new call is displayed with date and time of calling. If the caller
appears in the directory, the name is displayed alternately with
the number.
• Press the key to display the following call or press
key to display the previous call.
• Press twice the
• Press the key to end the consultation.
Storing a log number in the directory
When a call number is displayed:
1 - Press the key and then
2 - Press the key, then seize a memory number (01 to 20)
or press directly the
3 - Enter the name and press the
(or press the key to store only the number).
The number is automaticaly displayed.
4 - Press the key and then
2 bips are emitted. The memory is stored.
Calling a number from the log
• Press the key or pick up the handset to call the displayed
number. The number is dialled automatically.
Deleting all the calls log : in standby mode,
1 - Press the key. DELETE ALL? is displayed.
2 - Press again the
MESSAGE DEL is displayed.
key to delete the displayed call.
key.
, or keys.
key.
key to confirm.
key to confirm.
26
NEW TOTAL
(**) If there is no new call,
the consulted and no-deleted
calls are displayed, from the
older to the recenter.
DELETE ALL?
NEW TOTAL
PAGE 26