Installing Your M220E - Nortel M220E User Manual

MNPS8592XAA.qxd 6/12/00 10:25 Page 19

INSTALLING YOUR M220E

1 - Plug in the handset cord.
2 - Plug in the line and mains connectors (see page 18, Advice
and safety).
M220E is ready to operate. You can call and receive calls.
Changing the language
1 - Press the key and the 4 key. FRANCAIS is displayed.
2 - Press the or
3 - Press the key to confirm the selection. 2 beeps are emitted.
Adjusting the screen contrast
1 - Press the key and the 5 key. CONTRAST is displayed.
2 - Press the or
3 - Press the key to confirm the selection. 2 beeps are emitted.
Delete / re-establish the key sound: in standby mode,
- press the key to delete the key sound.
- press the to re-establish the key sound.
2 beeps are emitted.
keys. ENGLISH is displayed.
keys to select the contrast (5 levels).
Connector for power
supply unit
Line connector
Wall-mounting button-
holes
Handset pin in wall-
mouted position
Adjustment ring level
(hight - medium - low)
Adjustment flashing time
Low location : 270 ms
High location : 100 ms
Handset cord channel
Handset connector
Line cord channel in
wall-mounted
position
CONTRAST
PAGE 19