Mitsubishi Electric AG-150A Instruction Book page 47

(1) Changing the building manager name
To change the building manager name, touch the user name input button, and enter the user name on the keyboard that appears in 20
characters or less.
(2) Changing the password
To change the building manager password, touch the password input button, and enter the password that is between 3 and 10 character
long on the keyboard that appears. Press Retype Password, and enter the same password again.
* On the screen, password will appear as asterisks with each * representing a character.
Press the [Save setting] button to reflect the new user name and password.
(3) Making the settings for available functions
Touch the function to enable the function (An orange frame will appear around the selected item), or touch the selected item again to
deselect it (no orange frame). Press the [Save setting] button to save the changes.
Table Available Function List
Date and time
Basic system
Groups
Initial setting
Interlocked LOSSNAY
Blocks
Floor Layout
*1: At factory shipment, the operation of the building manager is prohibited.
Function
*1
Group name
Group structure
*1
Block name
Block structure
Floor name
Floor configuration
Current date and time setting
AG-150A network setting, external output setting
Group name setting
Connection setting of indoor units, remote controllers, system
*1
controllers and general equipment in a group
Connection setting of interlocked LOSSNAY
Block name setting
*1
Registration setting of groups in a block
Floor name setting
Floor configuration setting
– 45 –
Content