Mitsubishi Electric AG-150A Instruction Book page 44

5-9-1 Making the floor settings
Touch the basic floor setting button to bring up the basic floor setting window.
Number of floors
setting button
Layout selection
button
(1) Changing the floor layout display
(2) Changing the floor level name or floor name
5-9-2 Changing the display position of the groups
To move a group to another floor, first, select the group to be moved on the floor layout setting window. (An orange window will appear
around the selected item.) Next, touch the [Cut] button (A pale orange frame will appear around the selected item.), select the floor to
move the icon to, and touch [Paste] button. The selected group to be moved will be moved to the floor to move to.
To cancel, touch the paste button on the same floor as where the cut button was touched. (The orange frame will disappear.) Press
[Save setting] to save the changes.
* If you try to exit the window without saving the changes by touching the menu bar or the tabs, a popup window will appear, alerting you
that the changes have not been saved. If you exit the window without saving the changes, these changes will not be reflected.
Select the total number of floors on the basic floor setting window with
the up/down arrow buttons, and select the desired type of floor layout.
Not all types of floor layouts may not be available, depending on the
number of floors.
* No. of floors = 0: No layouts are selectable. (allocated in the
unregistered floor area)
* No. of floors = 1-3: All layouts are selectable
* No. of floors = 4-5: [1 column×1 row][2×1][1×2][3×1][2×2] are
selectable.
* No. of floors = 6-8: [1 column×1 row][2×1][1×2] are selectable
* No. of floors = 9-10: [1column×1 row] are selectable
* When a floor is deleted, the icons on the floor will be moved to the
bottom floor. If part of the floor is deleted, the icons on the deleted
area will be moved to the floor located at the top left of the original
floor.
Press the floor name button on the basic floor setting window, and
enter the floor name in three characters or less.
Press the floor name button and enter the floor name in 20 characters
or less.
– 42 –
Floor level button
Floor Name button