Prohibiting The Operation Of Air Conditioning Units From The Local Remote Controllers - Mitsubishi Electric AG-150A Instruction Book

4-2 Prohibiting the operation of air conditioning units from the local remote controllers

(1) Air conditioning unit group
Temperature
Remote operation
prohibit switch
Function
1 ON/OFF Select the operation
status (ON or OFF).
2 MODE Select the desired
operation mode from
one of the icons below
"Mode".
3 Set Temperature Set the temperature by
using the Up/Down
arrows below "Set
Temp".
4 Air Direction Set the air flow direction
Setting with the Up/Down
arrows below "Air
Direction".
Filter sign reset
Operation method
An orange frame will appear around the selected button.
An orange frame will appear around the selected mode.
Pressing the Up/Down arrow increases/decreases the temperature by one degree
respectively.
The settable temperature range depends on the mode and model. If the Up arrow is
pressed when the upper limit temperature is displayed. the lower limit temperature will
appear, and the Down arrow vice versa.
5-speed model
(Swing and Auto are not available on some models. Depending on the model four or
five air flow directions are available.)
ON/OFF switch
Model Cooling/Dry
Standard temp 19 ~ 30°C
model [67 ~ 87°F]
Mid temp model 14 ~ 30°C
(CITY MULTI) [57 ~ 87°F]
Mid temp model 14 ~ 30°C
(Mr. Slim) [57 ~ 87°F]
(Mid 3) (Mid 2)
(Swing) (Auto)
– 15 –
Operation mode switch
OK
Display
Heating
17 ~ 28°C
[63 ~ 83°F]
17 ~ 28°C
[63 ~ 83°F]
14 ~ 28°C
[57 ~ 83°F]
(Mid 1) (Mid 0)
Operation status of
interlocked unit
Fan speed of
interlocked unit
Fan Speed
Air Direction
Cancel
Auto
19 ~ 28°C
[67 ~ 83°F]
17 ~ 28°C
[63 ~ 83°F]
14 ~ 28°C
[57 ~ 83°F]
(Horizontal)