AT&T MERLIN LEGEND Reference page 76

Planning
4. Under the "Telephone Number or Equipment" column, write the assigned
Directory Number from the local telephone company for each BRI line on the
line corresponding with the logical ID for its jack. If the telephone number is
not known, leave the column blank and enter the information later.
5. In the "Label" column, write the label for each BRI line. The labels can
contain up to seven characters, including capital letters, numbers,
ampersand (&), dash (—), space, colon (:), asterisk (*) and pound sign (#).
The factory assigned label is "Outside."
Refer to "Selecting Trunks Options" in the System P/arming Guide (555-620-112)
for the remaining entries on the form.
Jacks for Auxiliary Equipment
Auxiliary equipment cannot be connected to a BRI line jack.
QCC Operator to Receive Calls--Hybrid/PBX
Mode Only
Assign this option to BRI lines under the following conditions:
System operates in the Hybrid/PBX mode.
System includes one or more queued call consoles (QCCs).
Incoming calls on BRI lines ring into the QCC queue.
Assigning the QCC operator to receive calls on each BRI line determines, first, if
incoming calls on each BRI line ring into the QCC queue and, second, which
QCC operator position answers the calls.
BRI lines can be programmed to ring into the QCC queue just like other line
types. Planning form instructions for the system with the MERLIN LEGEND BRI
system are the same as for other releases of the MERLIN LEGEND system.
Line Options
4-7