AT&T MERLIN LEGEND Reference page 128

Maintenance
Table 6-2. BRI Error Messages (Continued)
Description of Error
Code
ENDPT IN RESTRICTED SVCE
3401
Service on the link has been lost.
9403 LINK ESTABLISHMENT FAIL
Service on the link has been lost.
9404 NW NOT RESPOND TO SETUP
Service on the link has been lost.
9405 NW NOT RESPOND TO RELEAS
Service on the link has been lost.
9406 NW TOOK ENDPOINT OOS
Service on the link has been lost.
9407 ENDPOINT UNINIT (L2,L3)
Service on the link has been lost.
Possible Solution
Usually caused by an incorrect SPID. Check
the SPID and reprogram as necessary.
Check that the line is securely connected to
the port and that the LEDs on the 800 CO-
BRI module show proper operation. If the
module is working properly, the line may not
have been activated by the CO.
The CO is not responding to messages sent
by the MERLIN LEGEND system. Contact
the CO.
The CO is not responding to messages sent
by the MERLIN LEGEND system. Contact
the CO.
The CO has taken the endpoint out of
service. Contact the CO.
Caused when Layer 1 is up but Layer 2
and/or 3 is down for an endpoint. If problem
persists, contact the NTSC.
Error Logs and Error Messages
6-25