AT&T MERLIN LEGEND Reference page 64

F e a t u r e s
Hold
BRI calls made from a BRI Access button can be put on hold. If the user
puts the call to the destination on hold while a CO Transfer is in progress,
the user cannot return to the held-for-transfer call. The user should press
the BRI Access button and follow the steps in the Feature Use instructions
to initiate the transfer.
Last Number
The digits of numbers dialed on the BRI Access button during a CO
Dial
Transfer are stored and can be redialed by using the Last Number Dial
feature.
Park
A call on a BRI Access button cannot be parked on user or operator park
zones.
Pickup
A call on hold at a BRI Access button cannot be picked up by using the
Pickup feature, The call on hold for CO Transfer cannot be picked up by
using the Pickup feature.
Queued Call
The factory-set buttons assigned to a QCC operator position cannot
Console (QCC)
be changed.
a QCC operator position, and a QCC system operator cannot initiate a CO
Transfer.
The QCC operator can use the Join feature to connect a conference call
involving BRI lines. (If the QCC operator drops out of the conference, the
standard Trunk-to-Trunk Transfer feature is activated and the two outside
BRI lines are used for the duration of the call.) Refer to the Join feature in
the Feature Reference, (555-620-110).
Recall
The Recall feature cannot be used on calls from a BRI line button or from a
BRI Access button, While the user is on a call on either type of line button,
pressing of the Recall button is ignored.
Save Number
The digits of numbers dialed on the BRI Access button during a CO
Dial
Transfer can be stored and can be redialed by using the Save Number Dial
feature.
Therefore, a BRI Access button cannot be assigned to
CO Transfer
3-19